2 thoughts on “Is there any way to shrink the forming silicone products and change it to small size”
Doyle
Silicone products shrink the cream, which can reduce the size of silicone products in high temperature silicone rubber without affecting the nature of other aspects of silicon rubber (such as yellow transformation, mechanical properties, etc.). At the same time, it is easy to disperse when adding the shrinking cream, and it will not produce white spots. It is widely used in silicone rubber daily products, silicon rubber accessories, silicone rubber keys, sealing rings and other miscellaneous products, and the proportion is small. This kind of shrinking cream is usually a milky white glue material, which will not solidify at normal temperature. It usually adds 0.3-1.0%of the dose during glue. The shrinkage rate can reach 0.6-0.8%. , It’s about 20kg per barrel. The reminder is that the storage of this shrinking paste is very particular, which is not available everywhere. Because the main component of the shrinking paste is a low -boiling organic siliconane. Storage venues are strictly prohibited from light fire, away from heat sources, prevent static electricity, should have good ventilation. The room temperature should be stored below 25 ° C. When the product is stored in large quantities, it is strictly forbidden to contact the product contact reducing agent, rust, heavy metal ions and acid and alkali substances and flammable properties. Material.
Pay content for time limit to check for freenAnswer this friend hello, I am glad to answer it for you. After the oven, it can be slightly reduced (about 0.1-0.2)nSilicon Rubber shrinking agent-Silicon gel shrinking cream H-21 This product is the same level as Xinyue KEP-21, dedicated to the product size than the design requirements. Silicone products shrink the cream, which can reduce the size of silicone products in high -temperature silicon rubber without affecting the nature of other aspects of silicone rubber (such as yellow degeneration, mechanical properties, etc.). At the same time, it is very easy to disperse when adding this shrinking cream, and it will not produce white spots. It is widely used in silicone rubber daily products, silicone rubber mixes. Pieces, silicone rubber keys, sealing rings and other miscellaneous products, and the proportion is smaller. This kind of shrinking cream is usually an open substance in the APP, which will not solidify at room temperature. It usually adds 0.3-1.0%of the dose during rubber. The grain grain proportion (25 0.98 g/cm shrinks (add 2%) reduced 0.6-0.8%nYou can also use a hair dryer to open the hot air for a while to the silicone jacket (to be close to the blow)n1 morenBleak
Silicone products shrink the cream, which can reduce the size of silicone products in high temperature silicone rubber without affecting the nature of other aspects of silicon rubber (such as yellow transformation, mechanical properties, etc.). At the same time, it is easy to disperse when adding the shrinking cream, and it will not produce white spots. It is widely used in silicone rubber daily products, silicon rubber accessories, silicone rubber keys, sealing rings and other miscellaneous products, and the proportion is small. This kind of shrinking cream is usually a milky white glue material, which will not solidify at normal temperature. It usually adds 0.3-1.0%of the dose during glue. The shrinkage rate can reach 0.6-0.8%. , It’s about 20kg per barrel.
The reminder is that the storage of this shrinking paste is very particular, which is not available everywhere. Because the main component of the shrinking paste is a low -boiling organic siliconane. Storage venues are strictly prohibited from light fire, away from heat sources, prevent static electricity, should have good ventilation. The room temperature should be stored below 25 ° C. When the product is stored in large quantities, it is strictly forbidden to contact the product contact reducing agent, rust, heavy metal ions and acid and alkali substances and flammable properties. Material.
Pay content for time limit to check for freenAnswer this friend hello, I am glad to answer it for you. After the oven, it can be slightly reduced (about 0.1-0.2)nSilicon Rubber shrinking agent-Silicon gel shrinking cream H-21 This product is the same level as Xinyue KEP-21, dedicated to the product size than the design requirements. Silicone products shrink the cream, which can reduce the size of silicone products in high -temperature silicon rubber without affecting the nature of other aspects of silicone rubber (such as yellow degeneration, mechanical properties, etc.). At the same time, it is very easy to disperse when adding this shrinking cream, and it will not produce white spots. It is widely used in silicone rubber daily products, silicone rubber mixes. Pieces, silicone rubber keys, sealing rings and other miscellaneous products, and the proportion is smaller. This kind of shrinking cream is usually an open substance in the APP, which will not solidify at room temperature. It usually adds 0.3-1.0%of the dose during rubber. The grain grain proportion (25 0.98 g/cm shrinks (add 2%) reduced 0.6-0.8%nYou can also use a hair dryer to open the hot air for a while to the silicone jacket (to be close to the blow)n1 morenBleak