1 thought on “What is cultural stone? How should cultural stone be paved?”
Gayle
The paving method of cultural stone looks complicated, because we are not professionals, and it is very simple for professional muders. 1. Clean the wall and make rough surfaces. After the rock is arranged on the flat ground, the best effect is paved according to the arrangement of the arrangement (near the size, shape, and color rocks do not need to be adjacent). Third, white cement above 425, ordinary cement (cement: sand: 801 glue ratio is 1: 2: 0.03), ceramic adhesives (please note the instructions for adhesive use instructions) Adhesive. 1. Cultural stone 2. Cement tank (increase adhesion intensity) 3. Adhesive 4. Fully wet the rocks, apply the adhesive at the center of the rock to the shape of a mountain (when the antique bricks are posted by antique bricks The bottom of the brick can be coated with a thin layer of adhesive.) If the surface is accidentally soiled, use the brush to be cleaned in time. Fifth. Put the corner first. Fully press it to see the adhesive squeeze around the rock (some products are not Corner) 6. If the construction needs, you can cut the rocks to adjust. Seven, fill the coatings with plastic bags to fill the gap, pay attention to grasp the depth, the three -dimensional effect of the gap, the more the products of the product. Bamboo chips are removed from the excess sewing material, and the surface of the gaps is repaired with a brush dipped in water. The product does not need to be seams. Nine, when the rock is used outdoors, after paving, the first week of health can be used for a week. The characteristics of alkali) 10. Requirement of the seams: (1) Disordinate rock -the smallest seam around 10mm, the difference between the disorderly size is adjusted with the sewing agent. The difference between the time of the brick is adjusted with the sewing agent. It is best to use a combination knife on the surface of the wall surface to increase the adhesion strength of the product and the wall.
The paving method of cultural stone looks complicated, because we are not professionals, and it is very simple for professional muders. 1. Clean the wall and make rough surfaces. After the rock is arranged on the flat ground, the best effect is paved according to the arrangement of the arrangement (near the size, shape, and color rocks do not need to be adjacent). Third, white cement above 425, ordinary cement (cement: sand: 801 glue ratio is 1: 2: 0.03), ceramic adhesives (please note the instructions for adhesive use instructions) Adhesive. 1. Cultural stone 2. Cement tank (increase adhesion intensity) 3. Adhesive 4. Fully wet the rocks, apply the adhesive at the center of the rock to the shape of a mountain (when the antique bricks are posted by antique bricks The bottom of the brick can be coated with a thin layer of adhesive.) If the surface is accidentally soiled, use the brush to be cleaned in time. Fifth. Put the corner first. Fully press it to see the adhesive squeeze around the rock (some products are not Corner) 6. If the construction needs, you can cut the rocks to adjust. Seven, fill the coatings with plastic bags to fill the gap, pay attention to grasp the depth, the three -dimensional effect of the gap, the more the products of the product. Bamboo chips are removed from the excess sewing material, and the surface of the gaps is repaired with a brush dipped in water. The product does not need to be seams. Nine, when the rock is used outdoors, after paving, the first week of health can be used for a week. The characteristics of alkali) 10. Requirement of the seams: (1) Disordinate rock -the smallest seam around 10mm, the difference between the disorderly size is adjusted with the sewing agent. The difference between the time of the brick is adjusted with the sewing agent. It is best to use a combination knife on the surface of the wall surface to increase the adhesion strength of the product and the wall.